Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › YAW RATE AND DECELERATION SENSOR

YAW RATE AND DECELERATION SENSOR > REMOVAL

for Preparation Click here



1. REMOVE REAR CONSOLE BOX ASSEMBLY
(Click here)


2. REMOVE YAW RATE SENSOR PROTECTOR


C244845
  1. Remove the 2 nuts and the yaw rate sensor protector.



3. REMOVE YAW RATE AND DECELERATION SENSOR


C244846
  1. Disconnect the yaw rate and deceleration sensor connector.

  1. Remove the 2 nuts and the yaw rate and deceleration sensor.