Home › Vehicle Exterior › LIGHTING (EXT) › LIGHTING SYSTEM

LIGHTING SYSTEM > SYSTEM DESCRIPTION

for Preparation Click here



AUTOMATIC LIGHT CONTROL SYSTEM
  1. When the light control switch is in the AUTO position, the automatic light control sensor detects ambient light levels and outputs a signal to the main body ECU. The main body ECU controls the low beam headlights, fog lights*1, clearance lights, taillights and license plate lights.
  2. *1: w/ Fog Light

LIGHT AUTO TURN-OFF SYSTEM
The light auto turn-off system is used to prevent the driver from leaving the vehicle with the headlights, fog lights*1, clearance lights, taillights and license plate lights on. When all of the following conditions are met, the exterior lights turn off:
*1: w/ Fog Light
  1. The ignition switch is turned from ON to off.
  2. The headlights, fog lights*1, clearance lights, taillights and license plate lights are on.
  3. The driver door is opened.

BATTERY SAVER SYSTEM
  1. The battery saver system is designed to automatically turn off the headlights, fog lights*1, clearance lights, taillights and license plate lights if the doors and the light control switch remain in the same condition for 20 minutes or more when the ignition switch is off, the light control switch is in the AUTO, TAIL or HEAD position and the headlights, fog lights*1, clearance lights, taillights and license plate lights are on.

    1. This system is controlled by the main body ECU.
    2. This system is enabled when the following conditions are met:
      1. Ignition switch is off.
      2. The light control switch is in AUTO, TAIL or HEAD position (headlights, fog lights*1, clearance lights, taillights and license plate lights are on).
      3. The doors and the light control switch remain in the same condition for 20 minutes or more.
      1. *1: w/ Fog Light