Home › Vehicle Interior › LIGHTING (INT) › LIGHTING SYSTEM

LIGHTING SYSTEM > DATA LIST / ACTIVE TEST

for Preparation Click here



DATA LIST

HINT:
Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Main Body / Data List.

  5. According to the display on the intelligent tester, read the Data List.

    Main Body 
    Tester Display
    Measurement Item/Range
    Normal Condition
    Diagnostic Note
    ACC SW
    Ignition switch ACC signal /
    OFF or ON
    OFF: Ignition switch off
    ON: Ignition switch ACC or ON
    -
    IG SW
    Ignition switch ON signal /
    OFF or ON
    OFF: Ignition switch ACC or off
    ON: Ignition switch ON
    -
    RR Door Courtesy SW*1
    Rear door courtesy light switch LH and RH signal /
    OFF or ON
    OFF: Rear door LH and RH closed
    ON: Rear door LH or RH opened
    -
    RL Door Courtesy SW*1
    Rear door courtesy light switch LH and RH signal /
    OFF or ON
    OFF: Rear door LH and RH closed
    ON: Rear door LH or RH opened
    -
    Back Door Courtesy SW
    Back door courtesy light switch signal /
    OFF or ON
    OFF: Back door closed
    ON: Back door opened
    -
    FR Door Lock Pos*2*3
    Front door unlock detection switch RH signal /
    LOCK or UNLOCK
    LOCK: Front door RH locked
    UNLOCK: Front door RH unlocked
    -
    FR Door Courtesy
    Front door courtesy light switch RH signal /
    ON or OFF
    ON: Front door RH closed
    OFF: Front door RH opened
    -
    FL Door Lock Pos*2*4
    Front door unlock detection switch LH signal /
    LOCK or UNLOCK
    LOCK: Front door LH locked
    UNLOCK: Front door LH unlocked
    -
    FL Door Courtesy
    Front door courtesy light switch LH signal /
    ON or OFF
    ON: Front door LH closed
    OFF: Front door LH opened
    -
    RR-Door Lock Pos SW
    Not available /
    OFF or ON
    -
    -
    RL-Door Lock Pos SW
    Not available /
    OFF or ON
    -
    -
    I/L ON W/Door Key Unlock*5
    Function which turns on interior lights when door is unlocked /
    OFF or ON
    Customized setting displayed
    -
    Lighting Time*5
    Lighting time after closing all doors /
    15 s, 7.5 s or 30 s
    Customized setting displayed
    -
    I/L when ACC OFF*5
    Function which turns on lights when ignition switch is turned from ACC to off /
    OFF or ON
    Customized setting displayed
    -

    1. *1: for 5 Door
    2. *2: w/ Power Door Lock
    3. *3: for RHD
    4. *4: for LHD
    5. *5: w/ Automatic Light Control System


ACTIVE TEST

HINT:
Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.

  1. Connect the intelligent tester to the DLC3.

  2. Turn the ignition switch to ON.

  3. Turn the intelligent tester on.

  4. Enter the following menus: Body / Main Body / Active Test.

  5. According to the display on the intelligent tester, perform the Active Test.

    Main Body 
    Tester Display
    Test Part
    Control Range
    Diagnostic Note
    Illuminated Entry System
    Map light assembly
    OFF or ON
    Map light switch at DOOR position and all doors closed.
    Dimmer Signal*1
    Illumination dimming
    OFF or ON
    -

    1. *1: w/ Automatic Light Control System