Home › Vehicle Interior › LIGHTING (INT) › LIGHTING SYSTEM

LIGHTING SYSTEM > CUSTOMIZE PARAMETERS

for Preparation Click here



CUSTOMIZE LIGHTING SYSTEM (INT)

HINT:
The following items can be customized.

NOTICE:
  1. When the customer requests a change in a function, first make sure that the function can be customized.
  2. Record the current settings before customizing.

  1. Customizing with the intelligent tester.

    1. Connect the intelligent tester to the DLC3.

    2. Turn the ignition switch to ON.

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Main Body / Utility / Customize / Illuminated Entry.

    5. Select the setting by referring to the table below.

      Illuminated Entry 
      Display
      Default
      Content
      Setting
      Relevant ECU
      Lighting Time*1
      15 s
      A function that changes the duration that the lights remain on after closing the doors (the lights quickly fade out when the ignition switch is turned to ACC or ON).
      15 s / 7.5 s / 30 s
      Main body ECU
      I/L when ACC OFF*1
      ON
      A function that turns on the lights when the ignition switch is turned from ON or ACC to off (the lights turn on when the room light switch are set to DOOR).
      OFF or ON
      Main body ECU
      I/L ON W/Door Key Unlock*1
      ON
      A function that turns on the lights when the door is unlocked (the lights turn on when the room light switch are set to DOOR).
      OFF or ON
      Main body ECU
      *1: w/ Automatic Light Control System