Home › Vehicle Exterior › WIPER / WASHER › REAR WIPER MOTOR

REAR WIPER MOTOR > INSPECTION

for Preparation Click here



1. INSPECT REAR WIPER MOTOR ASSEMBLY


    E217535E03
  1. Check the rear wiper motor operation.
    Text in Illustration 
    *a
    Component without harness connected
    (Rear Wiper Motor Assembly)

    1. Apply battery voltage and check the operation of the rear wiper motor.

      Specified Condition:
      Measurement Condition
      Specified Condition
      Battery positive (+) → 3 (+B)
      Battery negative (-) → 1 (-1)
      Battery negative (-) → 2 (E)
      Rear wiper motor operates.

      If the result is not as specified, replace the rear wiper motor.