REAR WIPER MOTOR > REMOVAL |
| 1. REMOVE BACK DOOR TRIM BOARD |
![]() |
Disengage the 11 clips and remove the back door trim board.
| 2. REMOVE REAR WIPER ARM HEAD CAP |
![]() |
Disengage the 2 claws and the 2 hinges, and remove the rear wiper arm head cap.
| 3. REMOVE REAR WIPER ARM AND BLADE ASSEMBLY |
![]() |
Remove the nut and the rear wiper arm and blade assembly.
| 4. REMOVE REAR WIPER MOTOR ASSEMBLY |
![]() |
Disconnect the connector.
Loosen the 3 bolts and remove the rear wiper motor assembly.
| 5. REMOVE REAR WIPER MOTOR GROMMET |
![]() |
Remove the rear wiper motor grommet.