IGNITION COIL AND SPARK PLUG > INSTALLATION |
| 1. INSTALL SPARK PLUG |
Using a 16 mm spark plug wrench, install the 4 spark plugs.
| 2. INSTALL NO. 1 IGNITION COIL |
Install the 4 No. 1 ignition coils with the 4 bolts.
![]() |
| *1 | Body |
| *2 | Cap |
Connect the 4 No. 1 ignition coil connectors.
| 3. INSTALL NO. 2 CYLINDER HEAD COVER |
Install the No. 2 cylinder head cover with the 4 nuts.