IGNITION COIL AND SPARK PLUG > REMOVAL |
| 1. REMOVE NO. 2 CYLINDER HEAD COVER |
![]() |
Remove the 4 nuts and No. 2 cylinder head cover.
| 2. REMOVE NO. 1 IGNITION COIL |
![]() |
Disconnect the 4 No. 1 ignition coil connectors.
![]() |
Remove the 4 bolts and the 4 No. 1 ignition coils.
| 3. REMOVE SPARK PLUG |
![]() |
Using a 16 mm spark plug wrench, remove the 4 spark plugs.