Home › Engine / Hybrid System ยท 2NZ-FE › ENGINE CONTROL › IGNITION COIL AND SPARK PLUG

IGNITION COIL AND SPARK PLUG > REMOVAL

for Preparation Click here



1. REMOVE NO. 2 CYLINDER HEAD COVER


    A116235
  1. Remove the 4 nuts and No. 2 cylinder head cover.



2. REMOVE NO. 1 IGNITION COIL


    A156073
  1. Disconnect the 4 No. 1 ignition coil connectors.



    A156074
  1. Remove the 4 bolts and the 4 No. 1 ignition coils.



3. REMOVE SPARK PLUG


    A156075
  1. Using a 16 mm spark plug wrench, remove the 4 spark plugs.