Home › Vehicle Interior › HEATING / AIR CONDITIONING › BLOWER RESISTOR

BLOWER RESISTOR > INSPECTION

for Preparation Click here



1. INSPECT BLOWER RESISTOR


    I105412E03
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1 - 4
    Always
    3.12 to 3.60 Ω
    3 - 4
    Always
    1.45 to 1.67 Ω
    2 - 4
    Always
    0.52 to 0.60 Ω

    1. If the result is not as specified, replace the blower resistor.
    Text in Illustration 
    *a
    Component without harness connected
    (Blower Resistor)