Home › Vehicle Interior › HEATING / AIR CONDITIONING › FRONT BLOWER MOTOR

FRONT BLOWER MOTOR > INSPECTION

for Preparation Click here



1. INSPECT BLOWER MOTOR WITH FAN SUB-ASSEMBLY (for LHD)


    I101232E03
  1. Apply battery voltage to the blower motor with fan sub-assembly and check the operation of the motor.
    Text in Illustration 
    *a
    Component without harness connected
    (Blower Motor With Fan Sub-assembly)

    OK:
    Measurement Condition
    Specified Condition
    Battery positive (+) → Terminal 2
    Battery negative (-) → Terminal 1
    The blower motor operates smoothly

    1. If the result is not as specified, replace the blower motor with fan sub-assembly.



2. INSPECT BLOWER MOTOR WITH FAN SUB-ASSEMBLY (for RHD Manual Air Conditioning System)


    I105109E02
  1. Apply battery voltage to the blower motor with fan sub-assembly and check the operation of the motor.
    Text in Illustration 
    *a
    Component without harness connected
    (Blower Motor With Fan Sub-assembly)

    OK:
    Measurement Condition
    Specified Condition
    Battery positive (+) → Terminal 2
    Battery negative (-) → Terminal 1
    The blower motor operates smoothly

    1. If the result is not as specified, replace the blower motor with fan sub-assembly.