WASHER NOZZLE (for Front Side) > INSTALLATION |
| 1. INSTALL WASHER NOZZLE SUB-ASSEMBLY |
Engage the 2 claws and install the washer nozzle.
| 2. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY |
![]() |
Scrape any metal powder off the serrated part of the wiper arm with a round file or the equivalent (when reinstalling).
| *1 | Wire Brush |
| *a | Wiper Arm Serration |
| *b | Wiper Pivot Serration |
Clean the wiper arm serrations.
Clean the wiper pivot serrations with a wire brush.
![]() |
Install the front wiper sub arm.
| *a | Pivot of Front Wiper Sub Arm |
![]() |
Install the front wiper arm and blade with the nut to the position as shown in the illustration.
| *a | Mark for Blade Position |
Align the rib of the washer hose with the rib of the washer nozzle and connect them.
![]() |
for LHD:
| *1 | Rib |
![]() |
| *1 | Rib |
![]() |
| *1 | Washer Nozzle |
| *2 | Washer Hose Joint |
| *3 | Washer Hose |
| *4 | Rib |
![]() |
for RHD:
| *1 | Rib |
![]() |
| *1 | Rib |
![]() |
| *1 | Washer Nozzle |
| *2 | Washer Hose Joint |
| *3 | Washer Hose |
| *4 | Rib |
Operate the front wipers while spraying washer fluid onto the windshield. Make sure that the front wipers function properly and the wipers do not come into contact with the vehicle body.
| 3. INSTALL FRONT WIPER ARM HEAD CAP |
![]() |
Engage the 3 claws to install the front wiper arm head cap.