WASHER NOZZLE (for Front Side) > REMOVAL |
| 1. REMOVE FRONT WIPER ARM HEAD CAP |
![]() |
Using a screwdriver with its tip wrapped in protective tape, disengage the 3 claws and remove the front wiper arm head cap.
| *1 | Protective Tape |
| 2. REMOVE FRONT WIPER ARM AND BLADE ASSEMBLY |
![]() |
Disconnect the washer hose.
![]() |
Remove the nut and the front wiper main arm.
| *1 | Front Wiper Main Arm |
![]() |
Remove the front wiper sub arm and the front wiper arm and blade as shown in the illustration.
| *a | Head of the Front Wiper Sub Arm |
| *b | Joint Section on the End of the Front Wiper Arm |
| 3. REMOVE WASHER NOZZLE SUB-ASSEMBLY |
![]() |
Disengage the 2 claws and remove the washer nozzle.