Home › Vehicle Exterior › WIPER / WASHER › WASHER NOZZLE (for Rear Side)

WASHER NOZZLE (for Rear Side) > REMOVAL

for Preparation Click here



1. REMOVE REAR SPOILER SUB-ASSEMBLY (w/ Rear Spoiler)
(Click here)


2. REMOVE REAR WASHER NOZZLE


    E221636E01
  1. Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and disconnect the rear washer nozzle.
    Text in Illustration 
    *1
    Protective Tape

    NOTICE:
    Be careful not to damage the windshield.

  1. Remove the rear washer nozzle from the washer hose.