Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › REAR DOOR BELT MOULDING

REAR DOOR BELT MOULDING > INSTALLATION

for Preparation Click here



1. INSTALL REAR DOOR GLASS OUTER WEATHERSTRIP ASSEMBLY


    B272511
  1. Engage the 5 claws and install a new rear door glass outer weatherstrip.



2. INSTALL REAR DOOR GLASS RUN

HINT:
Use the same procedure as for the RH side .



3. INSTALL REAR DOOR GLASS SUB-ASSEMBLY

HINT:
Use the same procedure as for the RH side .



4. INSTALL REAR DOOR WINDOW DIVISION BAR SUB-ASSEMBLY

HINT:
Use the same procedure as for the RH side .



5. INSTALL REAR DOOR SERVICE HOLE COVER (w/ Rear Speaker)

HINT:
Use the same procedure as for the RH side .



6. INSTALL REAR DOOR SERVICE HOLE COVER (w/o Rear Speaker)

HINT:
Use the same procedure as for the RH side .



7. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY

HINT:
Use the same procedure as for the RH side .



8. INSTALL REAR DOOR ARMREST BASE UPPER PANEL (w/o Power Window)

HINT:
Use the same procedure as for the RH side .



9. INSTALL REAR DOOR WINDOW REGULATOR HANDLE ASSEMBLY (w/o Power Window)

HINT:
Use the same procedure as for the RH side .



10. INSTALL REAR DOOR ARMREST BASE UPPER PANEL (w/ Power Window)

HINT:
Use the same procedure as for the RH side .



11. INSTALL REAR DOOR FRAME GARNISH

HINT:
Use the same procedure as for the RH side .