RADIO RECEIVER > INSTALLATION |
| 1. INSTALL NO. 2 RADIO BRACKET |
Install the No. 2 radio bracket with the 3 bolts.
| 2. INSTALL NO. 1 RADIO BRACKET |
Install the No. 1 radio bracket with the 3 bolts.
| 3. INSTALL RADIO RECEIVER ASSEMBLY WITH BRACKET |
Connect the connectors.
![]() |
Align the 2 holes in the radio bracket with the 2 bosses of the instrument panel and engage the 4 clips.
Install the radio receiver assembly with bracket with the 4 screws.
| 4. INSTALL INSTRUMENT CLUSTER FINISH CENTER PANEL SUB-ASSEMBLY |
Connect the connector.
Engage the 4 clips and install the instrument cluster finish center panel.
| 5. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY |
![]() |
Engage the 4 guides and 10 clips and install the instrument cluster finish panel garnish.