Home › Audio/Visual/Telematics › AUDIO / VIDEO › REAR DOOR SPEAKER

REAR DOOR SPEAKER > INSTALLATION

for Preparation Click here



1. INSTALL REAR SPEAKER ASSEMBLY


    E222079E01
  1. Using an air riveter or hand riveter, install the rear speaker assembly onto the rear door panel with 3 new strike rivets.

    HINT:
    Install the new strike rivets in the order shown in the illustration.

    NOTICE:

    1. B130465
      Do not pry the rivet with the riveter, as this will cause damage to the riveter and mandrel.

    2. B130466
      Confirm that the rivets are seated properly against the speaker.
    3. Do not tilt the riveter when installing the rivet onto the speaker.
    4. Do not leave any space between the rivet head and speaker.

    5. B130467
      Do not leave any space between the speaker and door. Firmly hold the 2 items together while installing the rivet.

  1. Connect the connector.



2. INSTALL REAR DOOR TRIM BOARD SUB-ASSEMBLY


    B271675E01
  1. Connect the rear door lock remote control cable and the rear door inside locking cable to the rear door inside handle.
    Text in Illustration 
    *1
    Rear Door Lock Remote Control Cable Assembly
    *2
    Rear Door Inside Locking Cable Assembly



    B271674
  1. Engage the 7 clips and install the rear door trim board.



    B271673
  1. Install the 3 screws.



    B275408
  1. Engage the claw and close the cover.



3. INSTALL REAR DOOR ARMREST BASE PANEL UPPER (w/ Power Window)


    B271671
  1. Connect the connector.

  1. Engage the 9 claws and 3 guides, and install the rear armrest base upper panel.



4. INSTALL REAR DOOR ARMREST BASE PANEL UPPER (w/o Power Window)


    B271670
  1. Engage the 5 claws and 2 guides, and install the front armrest base upper panel.



5. INSTALL REAR DOOR WINDOW REGULATOR HANDLE ASSEMBLY (w/o Power Window)


    B271669E01
  1. Install the window regulator handle plate.
    Text in Illustration 
    *a
    Inside of Vehicle

  1. Open all the windows.



    B271709E01
  1. Install the rear door window regulator handle with the clip at the angle shown in the illustration.
    Text in Illustration 
    *a
    Assemble with Glass in Fully Open Position



6. INSTALL REAR DOOR FRAME GARNISH


    B271672
  1. Engage the guide.

  1. Engage the 2 clips and claw and install the rear door frame garnish.