Home › Vehicle Interior › INTERIOR PANELS / TRIM › ROOF HEADLINING (for 5 Door)

ROOF HEADLINING (for 5 Door) > REASSEMBLY

for Preparation Click here



1. INSTALL NO. 1 ROOF WIRE


  1. Align the No. 1 roof wire positioning tape with the markings of the roof headlining.


    B284338E01


    Text in Illustration 
    *1
    Tape
    *2
    Positioning Tape
    *3
    Marking
    -
    -

  1. Install the No. 1 roof wire onto the roof headlining with 7 new pieces of tape.

    NOTICE:
    1. Apply the tape securely in place.
    2. Do not touch the adhesive surface when applying the tape to prevent adhesion failure.



2. INSTALL REAR SIDE RAIL SPACER RH (w/ Curtain Shield Airbag)


    B272638
  1. Align the markings on the roof headlining assembly with the rear side rail spacer and install the rail spacer using hot melt glue.
    Text in Illustration 
    V100155
    Adhesive Portion



3. INSTALL REAR SIDE RAIL SPACER LH (w/ Curtain Shield Airbag)

HINT:
Use the same procedure as for the RH side.



4. INSTALL REAR SIDE RAIL SPACER RH (w/o Curtain Shield Airbag)


    B272637
  1. Align the markings on the roof headlining assembly with the rear side rail spacer and install the rail spacer using hot melt glue.
    Text in Illustration 
    V100155
    Adhesive Portion



5. INSTALL REAR SIDE RAIL SPACER LH (w/o Curtain Shield Airbag)

HINT:
Use the same procedure as for the RH side.



6. INSTALL REAR ROOF SILENCER PAD


    B284351
  1. Align the markings on the roof headlining assembly with the 4 rear roof silencer pads and install the silencer pads using hot melt glue.



7. INSTALL NO. 5 ROOF SILENCER PAD


    B284350
  1. Align the markings on the roof headlining assembly with the 2 No. 5 roof silencer pads and install the silencer pads using hot melt glue.



8. INSTALL ROOF SILENCER PAD


  1. Align the markings on the roof headlining assembly with the 4 roof silencer pads and install the silencer pads using hot melt glue.


    B284392E01


    Text in Illustration 
    *1
    Roof Silencer Pad
    *2
    Marking
    *a
    25.0 mm (0.984 in.)
    -
    -



9. INSTALL NO. 2 ANTENNA CORD SUB-ASSEMBLY


  1. Install the antenna cord into the clamp of the rear side rail spacer.


    E229064E01


    Text in Illustration 
    *1
    Tape
    *2
    Positioning Tape
    *3
    Marking
    -
    -
    V100136
    Front
    -
    -

  1. Align the 2 antenna cord positioning tapes with the markings of the roof headlining.

  1. Install the antenna cord onto the roof headlining with 11 new pieces of tape.



  1. Install the rest of antenna cord onto the roof headlining with a new piece of tape.


    E229065E01


    Text in Illustration 
    *1
    Tape
    *2
    Marking
    *a
    Rest of Antenna Cord
    -
    -
    V100136
    Front
    -
    -



10. INSTALL REAR SEAT SHOULDER BELT COVER


    B284332
  1. Engage the 6 claws and 2 guides and install the rear seat shoulder belt cover.