ROOF HEADLINING (for 3 Door) > DISASSEMBLY |
| 1. REMOVE REAR SEAT SHOULDER BELT COVER |
![]() |
Disengage the 6 claws and the 2 guides and remove the rear seat shoulder belt cover.
| 2. REMOVE NO. 2 ANTENNA CORD SUB-ASSEMBLY |
Remove the 12 pieces of tape.

Remove the antenna cord from the clamp of the rear side rail spacer.
| 3. REMOVE ROOF SILENCER PAD |
Remove the 4 roof silencer pads.

| 4. REMOVE NO. 5 ROOF SILENCER PAD |
![]() |
Remove the 2 No. 5 roof silencer pads.
| 5. REMOVE REAR ROOF SILENCER PAD |
![]() |
Remove the 4 rear roof silencer pads.
| 6. REMOVE REAR SIDE RAIL SPACER RH (w/ Curtain Shield Airbag) |
![]() |
Remove the 2 adhesive portions and the rear side rail spacer.
![]() | Adhesive Portion |
| 7. REMOVE REAR SIDE RAIL SPACER LH (w/ Curtain Shield Airbag) |
| 8. REMOVE REAR SIDE RAIL SPACER RH (w/o Curtain Shield Airbag) |
![]() |
Remove the 3 adhesive portions and the rear side rail spacer.
![]() | Adhesive Portion |
| 9. REMOVE REAR SIDE RAIL SPACER LH (w/o Curtain Shield Airbag) |
| 10. REMOVE NO. 1 ROOF WIRE |
![]() |
Remove the 7 pieces of tape.
Remove the No. 1 roof wire from the roof headlining.