Home › Audio/Visual/Telematics › AUDIO / VIDEO › STEERING PAD SWITCH

STEERING PAD SWITCH > INSPECTION

for Preparation Click here



1. INSPECT STEERING PAD SWITCH ASSEMBLY (w/o Microphone)


  1. Measure the resistance according to the value(s) in the table below.


    C233656E02


    Text in Illustration 
    *a
    Component without harness connected
    (Steering Pad Switch Assembly)
    *b
    SEEK+
    *c
    SEEK-
    *d
    VOL+
    *e
    VOL-
    *f
    MODE

    Standard Resistance:

    Tester Connection
    Switch Condition
    Specified Condition
    10 (AU1) - 8 (EAU)
    No switch pushed
    95 to 105 kΩ
    9 (AU2) - 8 (EAU)
    No switch pushed
    95 to 105 kΩ
    10 (AU1) - 8 (EAU)
    VOL+ switch: pushed
    950 to 1050 Ω
    9 (AU2) - 8 (EAU)
    VOL+ switch: pushed
    95 to 105 kΩ
    10 (AU1) - 8 (EAU)
    VOL- switch: pushed
    2955 to 3265 Ω
    9 (AU2) - 8 (EAU)
    VOL- switch: pushed
    95 to 105 kΩ
    10 (AU1) - 8 (EAU)
    SEEK+ switch: pushed
    Below 2.5 Ω
    9 (AU2) - 8 (EAU)
    SEEK+ switch: pushed
    95 to 105 kΩ
    10 (AU1) - 8 (EAU)
    SEEK- switch: pushed
    313 to 345 Ω
    9 (AU2) - 8 (EAU)
    SEEK- switch: pushed
    95 to 105 kΩ
    10 (AU1) - 8 (EAU)
    MODE switch: pushed
    95 to 105 kΩ
    9 (AU2) - 8 (EAU)
    MODE switch: pushed
    Below 2.5 Ω

    If the result is not as specified, replace the steering pad switch assembly.



2. INSPECT STEERING PAD SWITCH ASSEMBLY (w/ Microphone)


  1. Measure the resistance according to the value(s) in the table below.


    E232544E01


    Text in Illustration 
    *a
    Component without harness connected
    (Steering Pad Switch Assembly)
    *b
    SEEK+
    *c
    SEEK-
    *d
    VOL+
    *e
    VOL-
    *f
    MODE
    *g
    ON HOOK
    *h
    OFF HOOK

    Standard Resistance:

    Tester Connection
    Switch Condition
    Specified Condition
    10 (AU1) - 8 (EAU)
    No switch pushed
    95 to 105 kΩ
    9 (AU2) - 8 (EAU)
    No switch pushed
    95 to 105 kΩ
    10 (AU1) - 8 (EAU)
    VOL+ switch: pushed
    950 to 1050 Ω
    9 (AU2) - 8 (EAU)
    VOL+ switch: pushed
    95 to 105 kΩ
    10 (AU1) - 8 (EAU)
    VOL- switch: pushed
    2955 to 3265 Ω
    9 (AU2) - 8 (EAU)
    VOL- switch: pushed
    95 to 105 kΩ
    10 (AU1) - 8 (EAU)
    SEEK+ switch: pushed
    Below 2.5 Ω
    9 (AU2) - 8 (EAU)
    SEEK+ switch: pushed
    95 to 105 kΩ
    10 (AU1) - 8 (EAU)
    SEEK- switch: pushed
    313 to 345 Ω
    9 (AU2) - 8 (EAU)
    SEEK- switch: pushed
    95 to 105 kΩ
    10 (AU1) - 8 (EAU)
    MODE switch: pushed
    95 to 105 kΩ
    9 (AU2) - 8 (EAU)
    MODE switch: pushed
    Below 2.5 Ω
    10 (AU1) - 8 (EAU)
    ON HOOK switch: pushed
    95 to 105 kΩ
    9 (AU2) - 8 (EAU)
    ON HOOK switch: pushed
    313 to 345 Ω
    10 (AU1) - 8 (EAU)
    OFF HOOK switch: pushed
    95 to 105 kΩ
    9 (AU2) - 8 (EAU)
    OFF HOOK switch: pushed
    950 to 1050 Ω

    If the result is not as specified, replace the steering pad switch assembly.