Home › Audio/Visual/Telematics › AUDIO / VIDEO › STEREO JACK ADAPTER ASSEMBLY

STEREO JACK ADAPTER ASSEMBLY > INSTALLATION

for Preparation Click here



1. INSTALL NO. 1 STEREO JACK ADAPTER ASSEMBLY
  1. Engage the 2 claws and install the No. 1 stereo jack adapter assembly.

  1. Connect the connector.



2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY


    B284292E01
  1. Engage the 3 guides and 2 hinges in the horizontal direction to install the glove compartment door.
    Text in Illustration 
    *1
    Hinge
    *2
    Guide

    NOTICE:
    Engage the 2 hinges in the horizontal direction, otherwise, installation failure caused by excessive play around the hinges will result.



    B284269
  1. While pushing in the sides of the glove compartment door as indicated by the arrows in the illustration, close the door to engage it to the 2 stoppers.

  1. Engage the claw and connect the glove compartment door stopper.