Home › Audio/Visual/Telematics › AUDIO / VIDEO › STEREO JACK ADAPTER ASSEMBLY

STEREO JACK ADAPTER ASSEMBLY > REMOVAL

for Preparation Click here



1. REMOVE GLOVE COMPARTMENT DOOR ASSEMBLY


    B284269
  1. Disengage the claw and separate the glove compartment door stoppers from the glove compartment door.

  1. Slightly flex the upper part of the glove compartment door to release the 2 stoppers and open the glove compartment door until it is horizontal.



    B284270E01
  1. Pull the glove compartment door out horizontally to disengage the 2 hinges and 3 guides and remove the glove compartment door.
    Text in Illustration 
    *1
    Hinge
    *2
    Guide

    NOTICE:
    Pull the glove compartment door out horizontally. Otherwise, the hinge may be damaged, making re-installation impossible.



2. REMOVE NO. 1 STEREO JACK ADAPTER ASSEMBLY


    E229067
  1. Disconnect the connector.

  1. Disengage the 2 claws and remove the No. 1 stereo jack adapter assembly.