DIFFERENTIAL CASE > INSPECTION |
| 1. INSPECT DIFFERENTIAL SIDE GEAR BACKLASH |
![]() |
Using a dial indicator, measure the front differential side gear backlash while holding 1 pinion gear toward the case.
Referring to the table below, select front differential side gear thrust washers which will ensure that the backlash is within the specifications for both sides.
| Part No. | Thickness mm (in.) |
| 41361-52010 | 1.50 (0.0589) |
| 41361-52020 | 1.55 (0.0609) |
| 41361-52030 | 1.60 (0.0629) |
| 41361-52040 | 1.65 (0.0649) |
| 41361-52050 | 1.70 (0.0669) |
| 41361-52060 | 1.75 (0.0689) |