REAR WIPER RUBBER > REPLACEMENT |
| 1. REMOVE REAR WIPER BLADE ASSEMBLY |
![]() |
Raise the wiper blade to the position where the claw disengages with a click sound, as shown in the illustration.
![]() |
Remove the rear wiper blade from the rear wiper arm in the direction indicated by the arrow in the illustration.
| 2. REMOVE REAR WIPER RUBBER |
![]() |
Lift and pull the end of the wiper rubber protrusion from the blade stopper as shown in the illustration.
| *1 | Stopper |
![]() |
Remove the rear wiper rubber with the 2 rear wiper rubber backing plates.
Remove the 2 rear wiper rubber backing plates from the rear wiper rubber.
| 3. INSTALL REAR WIPER RUBBER |
Install the 2 rear wiper rubber backing plates to the rear wiper rubber as shown in the illustration.
![]() |
![]() |
Insert the wiper rubber from the second claws of the wiper blade to the rear end claws.
After pushing the wiper rubber through the rear end claws, allow it to stick out from the rear end stopper.
| *1 | Second Claws |
| *2 | Rear End Claws |
| *3 | Rear End Stopper |
![]() |
Slide the wiper rubber through the front end claws.
| *1 | Front End Claws |
![]() |
| 4. INSTALL REAR WIPER BLADE ASSEMBLY |
![]() |
Engage the claw and install the rear wiper blade to the wiper arm in the illustration.