Home › Vehicle Exterior › WINDOW / GLASS › POWER WINDOW REGULATOR MOTOR (for Front Door)

POWER WINDOW REGULATOR MOTOR (for Front Door) > REMOVAL

for Preparation Click here


HINT:
  1. Use the same procedure for both the RH and LH sides.
  2. The procedure described below is for the RH side.



1. REMOVE FRONT DOOR WINDOW REGULATOR SUB-ASSEMBLY
(Click here)


2. REMOVE POWER WINDOW REGULATOR MOTOR ASSEMBLY


    B284406
  1. Using "TORX" socket wrench T25, remove the 3 screws and the power window regulator motor.