Home › Vehicle Interior › HEATING / AIR CONDITIONING › AIR CONDITIONING SYSTEM (for Automatic Air Conditioning System)

DTC    U0100    Lost Communication with ECM

DTC    U0131    Lost Communication with Electric Power Steering ECU

DTC    U0142    Lost Communication with Main Body ECU

DTC    U0155    Lost Communication with Combination Meter

for Preparation Click here


DESCRIPTION

The air conditioning amplifier assembly communicates with the ECM, power steering ECU assembly, main body ECU and combination meter assembly through the CAN communication system.

DTC No.
DTC Detection Condition
Trouble Area
U0100
Lost communication with ECM.
  1. CAN communication system
  2. ECM
  3. Air conditioning amplifier assembly
U0131
Lost Communication with power steering ECU assembly.
  1. CAN communication system
  2. Power steering ECU assembly
  3. Air conditioning amplifier assembly
U0142
Lost Communication with main body ECU.
  1. CAN communication system
  2. Main body ECU
  3. Air conditioning amplifier assembly
U0155
Lost Communication with combination meter assembly.
  1. CAN communication system
  2. Combination meter assembly
  3. Air conditioning amplifier assembly

INSPECTION PROCEDURE

1.CHECK FOR DTC (CAN COMMUNICATION SYSTEM)
  1. Use the intelligent tester to check if the CAN communication system is functioning normally.

    OK:
    CAN DTC is not output

    Result 
    Result
    Proceed to
    OK
    A
    NG (except Separate Type Yaw Rate Sensor)
    B
    NG (for Separate Type Yaw Rate Sensor)
    C



B
GO TO CAN COMMUNICATION SYSTEM (Click here)

C
GO TO CAN COMMUNICATION SYSTEM (Click here)
A

USE SIMULATION METHOD TO CHECK (Click here)