Home › Vehicle Interior › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)

FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side) > INSPECTION

for Preparation Click here



1. INSPECT FRONT SEAT INNER BELT ASSEMBLY (w/ Wire Harness)


B202370E19
  1. Measure the resistance according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    A-3 - B-1
    Always
    Below 1 Ω
    A-2 - B-3
    Front passenger side tongue plate released
    Below 1 Ω
    A-2 - B-3
    Front passenger side tongue plate fastened
    10 kΩ or higher

    Text in Illustration 
    *a
    Component without harness connected
    (Front Seat Inner Belt Assembly)
    *b
    Component without harness connected
    (Occupant Detection Sensor (Separate Type Front Seat Cushion Pad))
    If the result is not as specified, replace the front seat inner belt assembly.