CAMSHAFT OIL CONTROL VALVE > INSPECTION |
| 1. INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY |
![]() |
Measure the resistance according to the value(s) in the table below.
| Tester Connection | Condition | Specified Condition |
| 1 - 2 | 20°C (68°F) | 6.9 to 7.9 Ω |
| *a | Component without harness connected (Camshaft Timing Oil Control Valve Assembly) |
![]() |
Check the operation
Connect the positive (+) lead from a battery to terminal 1 and the negative (-) lead to terminal 2, and check the movement of the valve.
| *a | Component without harness connected (Camshaft Timing Oil Control Valve Assembly) |
| *b | When applied |
| *c | When cut off |