Home › Engine / Hybrid System ยท 1NZ-FE › ENGINE CONTROL › CAMSHAFT OIL CONTROL VALVE

CAMSHAFT OIL CONTROL VALVE > REMOVAL

for Preparation Click here



1. REMOVE NO. 2 CYLINDER HEAD COVER


    A116235
  1. Remove the 4 nuts and No. 2 cylinder head cover.



2. REMOVE CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY


    A116177
  1. Disconnect the camshaft timing oil control valve assembly connector.



    A116178
  1. Remove the bolt and camshaft timing oil control valve assembly.

  1. Remove the O-ring from the camshaft timing oil control valve assembly.