CAMSHAFT OIL CONTROL VALVE > ON-VEHICLE INSPECTION |
| 1. INSPECT CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY |
Connect the intelligent tester to the DLC3.
Start the engine and warm it up.
Turn the intelligent tester on.
Inspect the camshaft timing oil control valve.
Enter the following menus: Powertrain / Engine and ECT / Active Test / Control the VVT System (Bank 1).
Check the engine speed when the camshaft timing oil control valve is operated using the intelligent tester with the engine coolant temperature at 50°C (122°F) or less.
| Control Range | Specified Condition |
| OFF | Normal engine speed |
| ON | Rough idle or engine stalls (soon after camshaft timing oil control valve switched from OFF to ON) |