Home › Engine / Hybrid System ยท 1NZ-FE › ENGINE CONTROL › MASS AIR FLOW METER

MASS AIR FLOW METER > REMOVAL

for Preparation Click here



1. REMOVE MASS AIR FLOW METER
  1. Disengage the wire harness clamp.



    A248720
  1. Disconnect the connector of the mass air flow meter.

  1. Remove the 2 screws and the mass air flow meter.

    NOTICE:
    If a component has been dropped or subjected to a strong impact, replace it.



    A115141
  1. Remove the O-ring.