HEATED OXYGEN SENSOR (for Sensor 2) > INSTALLATION |
| 1. INSTALL HEATED OXYGEN SENSOR (for Sensor 2) |
![]() |
Using SST, install the heated oxygen sensor.
| *a | Fulcrum Length 300 mm |
| *b | Fulcrum Length 30 mm |
Pass the connector through the hole into the inside of the vehicle and install the oxygen sensor wire grommet.
Connect the heated oxygen sensor connector.
Install the wire harness to the wire harness bracket.
| 2. INSPECT FOR EXHAUST GAS LEAK |
| 3. INSTALL REAR CONSOLE BOX ASSEMBLY |