Home › Engine / Hybrid System ยท 1NZ-FE › ENGINE CONTROL › HEATED OXYGEN SENSOR (for Sensor 2)

HEATED OXYGEN SENSOR (for Sensor 2) > REMOVAL

for Preparation Click here



1. REMOVE REAR CONSOLE BOX ASSEMBLY
(Click here)


2. REMOVE HEATED OXYGEN SENSOR (for Sensor 2)


    A250513
  1. Disconnect the heated oxygen sensor connector.

  1. Remove the oxygen sensor wire grommet and pass the connector through the hole to the outside of the vehicle.



    A247793E01
  1. Using SST, remove the heated oxygen sensor.

    SST
    09224-00010  

    NOTICE:
    Do not damage the heated oxygen sensor.