Home › Vehicle Interior › HEATING / AIR CONDITIONING › REFRIGERANT LINE

REFRIGERANT LINE > REMOVAL

for Preparation Click here



1. REMOVE PIPING CLAMP


    I106057E01
  1. While pressing the end of the suction hose into the end of the suction tube, use pliers to squeeze together both sides of the piping clamp until it breaks apart.
    Text in Illustration 
    *1
    Suction Tube
    *2
    Suction Hose
    *3
    Piping Clamp
    *a
    Press In

    NOTICE:
    Make sure that fragments of the piping clamp do not enter the piping.

  1. Separate the suction hose.

    NOTICE:
    Clean off any dirt or water near the ends of the suction hose and suction tube.

  1. Remove the 2 O-rings from the suction hose.

    NOTICE:
    Wrap the open ends of the separated suction tube and suction hose with vinyl tape to prevent dirt or water from entering.