Home › Audio/Visual/Telematics › AUDIO / VIDEO › NOISE FILTER

NOISE FILTER > INSPECTION

for Preparation Click here



1. INSPECT RADIO SETTING CONDENSER


    B223208E02
  1. Measure the resistance of the noise filter according to the value(s) in the table below.

    Standard Resistance:
    Tester Connection
    Condition
    Specified Condition
    1(+B) - 2(GND)
    Always
    10 kΩ or higher
    2(GND) - 3(Body ground)
    Always
    Below 1 Ω