Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE BOOSTER (for LHD)

BRAKE BOOSTER (for LHD) > REASSEMBLY

for Preparation Click here



1. INSTALL BRAKE VACUUM CHECK VALVE ASSEMBLY
  1. Install the new check valve grommet to the brake booster assembly.

  1. Install the vacuum check valve assembly to the brake booster assembly.



2. TEMPORARILY INSTALL BRAKE MASTER CYLINDER PUSH ROD CLEVIS
  1. Install the push rod lock nut and brake master cylinder push rod clevis to the brake booster assembly.

    HINT:
    Tighten the push rod lock nut after adjusting the brake pedal height.