OUTER REAR VIEW MIRROR COVER > REMOVAL |
| 1. REMOVE OUTER MIRROR |
![]() |
Push the upper part of the outer mirror surface and tilt it.
| *1 | Protective Tape |
| *2 | Moulding Remover |
Apply protective tape to the bottom of the outer mirror cover.
Using a moulding remover, disengage the 4 claws.
Disengage the 2 guides and remove the outer mirror.
| 2. REMOVE OUTER MIRROR COVER |
![]() |
Using a screwdriver with its tip wrapped in protective tape, disengage the 4 claws from the upper inside of the mirror body.
| *1 | Protective Tape |
![]() |
Push the upper part of the mirror cover forward to tilt it, and then disengage the 2 claws on the lower part to remove the outer mirror cover.