Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE PEDAL

BRAKE PEDAL > REASSEMBLY

for Preparation Click here



1. INSTALL BRAKE PEDAL PAD


C197239E02
  1. Install the brake pedal pad onto the brake pedal.
    Text in Illustration 
    *A
    for Automatic Transaxle
    *B
    for Manual Transaxle



2. INSTALL BRAKE PEDAL BUSH


    C236007
  1. Apply lithium soap base glycol grease to the 2 new bushes.
    Text in Illustration 
    V100144
    Lithium Soap Base Glycol Grease

  1. Install the 2 bushes onto the brake pedal.



3. INSTALL BRAKE PEDAL SUB-ASSEMBLY
  1. Install the brake pedal sub-assembly onto the pedal support with the brake pedal shaft and nut.

    Torque:
    37 N*m{ 375 kgf*cm , 27 ft.*lbf }



4. INSTALL STOP LIGHT SWITCH MOUNTING ADJUSTER
  1. Install a new stop light switch mounting adjuster onto the pedal support.