Home › Vehicle Interior › LIGHTING (INT) › PERSONAL LIGHT

PERSONAL LIGHT > INSTALLATION

for Preparation Click here



1. INSTALL MAP LIGHT BULB
  1. for Type A:

    1. Install the 2 map light bulbs.

    2. Engage the 6 claws to install the map light lens.



  1. for Type B:

    1. Install the 2 map light bulbs into the 2 map light bulb sockets.



    2. E222043
    3. Turn the 2 map light bulb sockets in the direction indicated by the arrows and install them.



2. INSTALL MAP LIGHT ASSEMBLY
  1. Connect the connector.



    E222167
  1. Engage the 4 claws to install the map light assembly.