PERSONAL LIGHT > REMOVAL |
| 1. REMOVE MAP LIGHT ASSEMBLY |
![]() |
Using a moulding remover, disengage the 4 claws.
Disconnect the connector and remove the map light assembly.
| 2. REMOVE MAP LIGHT BULB |
for Type A:
![]() |
Disengage the 6 claws and remove the map light lens.
![]() |
Remove the 2 map light bulbs.
for Type B:
![]() |
Turn the 2 map light bulb sockets in the direction indicated by the arrows in the illustration to remove them.
Remove the 2 map light bulbs from the 2 map light bulb sockets.