Home › Vehicle Interior › LIGHTING (INT) › LUGGAGE COMPARTMENT ROOM LIGHT

LUGGAGE COMPARTMENT ROOM LIGHT > REMOVAL

for Preparation Click here



1. REMOVE NO. 2 ROOM LIGHT ASSEMBLY


    E222045E01
  1. Using a screwdriver with its tip wrapped in protective tape, disengage the claw.
    Text in Illustration 
    *1
    Protective Tape

  1. Disconnect the connector and remove the No. 2 room light assembly.



2. REMOVE NO. 2 ROOM LIGHT BULB
  1. Remove the No. 2 room light bulb from the room light lens.