BACK DOOR COURTESY SWITCH > INSTALLATION |
| 1. INSTALL BACK DOOR LOCK ASSEMBLY (w/ Power Door Lock) |
Apply MP grease to the sliding parts of the back door lock assembly.
Install the back door lock assembly with the 2 bolts.
Connect the connector.
| 2. INSTALL BACK DOOR LOCK ASSEMBLY (w/o Power Door Lock) |
Apply MP grease to the sliding parts of the back door lock assembly.
Install the back door lock assembly with the 2 bolts.
![]() |
Connect the back door lock control rod.
Connect the back door outside handle cable.
Connect the connector.
| 3. INSTALL BACK DOOR TRIM BOARD |
![]() |
Engage the 11 clips and install the back door trim board.