Home › Vehicle Interior › HEATING / AIR CONDITIONING › BLOWER UNIT

BLOWER UNIT > REASSEMBLY

for Preparation Click here



1. INSTALL CLEAN AIR FILTER


    I106214
  1. Install the clean air filter into the blower.

    NOTICE:
    Install the clean air filter with its UP marks oriented in the correct direction.



2. INSTALL AIR FILTER CASE


    I106215E01
  1. Insert the rib of the air filter case into the blower unit.

    NOTICE:
    Install the air filter case with its UP mark oriented in the correct direction.

  1. Pinch portion A to engage the claw and install the air filter case.



3. INSTALL BLOWER RESISTOR (for Manual Air Conditioning System)


    I101599
  1. Install the blower resistor with the 2 screws.



4. INSTALL BLOWER MOTOR CONTROL (for LHD Automatic Air Conditioning System)


    I106872
  1. Install the blower motor control with the 2 screws.



5. INSTALL BLOWER MOTOR WITH FAN SUB-ASSEMBLY


    I101208
  1. Install the blower motor with the 3 screws.



6. INSTALL NO. 1 AIR CONDITIONING WIRE (for LHD Automatic Air Conditioning System)


    I106871
  1. Engage the 3 clamps and install the air conditioning wire.

  1. Connect the connector.



7. INSTALL NO. 1 BLOWER DAMPER SERVO SUB-ASSEMBLY (for Automatic Air Conditioning System)


    I100751
  1. Install the blower damper servo with the 2 screws.



8. INSTALL AIR INLET DAMPER CONTROL CABLE SUB-ASSEMBLY (for Manual Air Conditioning System)


    I106729
  1. Engage the 3 claws and install the air inlet damper control cable.



9. INSTALL NO. 1 AIR DUCT SUB-ASSEMBLY


    I106209
  1. Engage the 2 claws and 2 guides, and install the air duct.