Home › Vehicle Interior › HEATING / AIR CONDITIONING › FRONT BLOWER MOTOR

FRONT BLOWER MOTOR > INSTALLATION

for Preparation Click here



1. INSTALL BLOWER MOTOR WITH FAN SUB-ASSEMBLY (for LHD Automatic Air Conditioning System)
  1. Install the blower motor with the 3 screws.

  1. Connect the 2 connectors.

  1. Engage the 3 clamps.



2. INSTALL BLOWER MOTOR WITH FAN SUB-ASSEMBLY (for RHD Automatic Air Conditioning System)
  1. Install the blower motor with the 3 screws.

  1. Connect the connector.



3. INSTALL BLOWER MOTOR WITH FAN SUB-ASSEMBLY (for Manual Air Conditioning System)
  1. Install the blower motor with the 3 screws.

  1. Connect the connector.

  1. Engage the clamp.



4. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
  1. Engage the guide and the 3 claws and install the instrument panel under cover.