Home › Vehicle Interior › HEATING / AIR CONDITIONING › FRONT BLOWER MOTOR

FRONT BLOWER MOTOR > REMOVAL

for Preparation Click here



1. REMOVE NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY


    B284271
  1. Disengage the 3 claws and the guide and remove the instrument panel under cover.



2. REMOVE BLOWER MOTOR WITH FAN SUB-ASSEMBLY (for LHD Automatic Air Conditioning System)


    I106873
  1. Disengage the 3 clamps.

  1. Disconnect the 2 connectors.



    I106974
  1. Remove the 3 screws and the blower motor.



3. REMOVE BLOWER MOTOR WITH FAN SUB-ASSEMBLY (for RHD Automatic Air Conditioning System)


    I106218
  1. Disconnect the connector.

  1. Remove the 3 screws and the blower motor.



4. REMOVE BLOWER MOTOR WITH FAN SUB-ASSEMBLY (for Manual Air Conditioning System)


    I106217
  1. Disengage the clamp.

  1. Disconnect the connector.

  1. Remove the 3 screws and the blower motor.