Home › Vehicle Interior › HEATING / AIR CONDITIONING › ROOM TEMPERATURE SENSOR

ROOM TEMPERATURE SENSOR > INSTALLATION

for Preparation Click here



1. INSTALL ROOM TEMPERATURE SENSOR (COOLER THERMISTOR)


    I106261
  1. Engage the 2 claws and install the room temperature sensor (cooler thermistor).



2. INSTALL AIR CONDITIONING CONTROL ASSEMBLY (for LHD)
  1. Connect the connectors and engage the clamp.

  1. Install the cooler hose.

  1. Engage the claw and 7 clips and install the air conditioning control.



3. INSTALL AIR CONDITIONING CONTROL ASSEMBLY (for RHD)
  1. Connect the connectors and engage the clamp.

  1. Install the cooler hose.

  1. Engage the claw and 7 clips and install the air conditioning control.



4. INSTALL NO. 1 INSTRUMENT CLUSTER FINISH PANEL
  1. Engage the 5 clips and install the instrument cluster finish panel.



5. INSTALL INSTRUMENT CLUSTER FINISH CENTER PANEL SUB-ASSEMBLY (w/ Radio Receiver)
  1. Connect the connector.

  1. Engage the 4 clips and install the instrument cluster finish center panel.



6. INSTALL INSTRUMENT CLUSTER FINISH CENTER PANEL SUB-ASSEMBLY (w/o Radio Receiver)
  1. Connect the connector.

  1. Engage the 7 clips and install the instrument cluster finish center panel.



7. INSTALL INSTRUMENT CLUSTER FINISH PANEL GARNISH ASSEMBLY


    B290374
  1. Engage the 4 guides and 10 clips and install the instrument cluster finish panel garnish.