Home › Vehicle Interior › DOOR LOCK › DOOR CONTROL SWITCH

DOOR CONTROL SWITCH > INSTALLATION

for Preparation Click here



1. INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (w/ Power Window)
  1. Install the power window regulator master switch with the 3 screws.



2. INSTALL DOOR CONTROL SWITCH ASSEMBLY (w/o Power Window)
  1. Engage the 2 claws and install the door control switch.



3. INSTALL FRONT ARMREST BASE UPPER PANEL (w/ Power Window)

HINT:
Use the same procedure as for the RH side .



4. INSTALL FRONT ARMREST BASE UPPER PANEL (w/o Power Window)

HINT:
Use the same procedure as for the RH side .