OPERATION
FRONT
Washer fluid in the washer reservoir is pressurized and fed by the washer pump/motor unit through the front washer system plumbing and fittings to the two front washer nozzles. Whenever routing the washer hose or a wire harness containing a washer hose, it must be routed away from hot, sharp, or moving parts; and, sharp bends that might pinch the hose must be avoided.
REAR
Washer fluid in the washer reservoir is pressurized and fed by the washer pump/motor unit through the rear washer system plumbing and fittings to the rear washer nozzle located on the Center High-Mounted Stop Lamp (CHMSL) on the top of the liftgate outer panel. Whenever routing the washer hose or a wire harness containing a washer hose, it must be routed away from hot, sharp, or moving parts; and, any sharp bends that might pinch the hose must be avoided.