INSTALLATION
PRESSURE HOSE - GEAR TO PUMP
1. Install the line (2) to the vehicle.
2. Install the three mounting brackets (6) for the pressure line (2) to the engine cradle.
3. Reconnect the power steering pressure line (2) to the power steering gear (7) Tighten to 28 N·m (21 ft.lbs.).
4. Reconnect the power steering pressure line (2) to the power steering pump (1) Tighten to 28 N·m (21 ft.lbs.).
5. Refill the power steering fluid and bleed the system, (Refer to 19 - STEERING/PUMP - STANDARD PROCEDURE).
RETURN HOSE - PUMP TO COOLER
1. Install the line (5) to the vehicle.
2. Reconnect the power steering return hose (53) to the power steering cooler (4).
3. Reconnect the power steering return hose (5) to the power steering pump (1) Tighten to 28 N·m (21 ft.lbs.).
4. Refill the power steering fluid and bleed the system, (Refer to 19 - STEERING/PUMP - STANDARD PROCEDURE).
RETURN HOSE - GEAR TO COOLER
1. Install the line (3) to the vehicle.
2. Reconnect the power steering return hose (3) to the power steering gear (7) Tighten to 28 N·m (21 ft.lbs.).
3. Reconnect the power steering return hose (3) to the fluid cooler (4).
4. Refill the power steering fluid and bleed the system, (Refer to 19 - STEERING/PUMP - STANDARD PROCEDURE).