REMOVAL
NON-ADJUSTABLE PEDAL
1. Disconnect the negative battery cable.
2. Remove retainer clip (1) that holds booster to pedal pin (3).
3. Remove the power brake booster (Refer to 5 - BRAKES/HYDRAULIC/MECHANICAL/POWER BRAKE BOOSTER - REMOVAL).
4. Lock the steering wheel into place.
5. Remove the 2 intermediate shaft bearing nuts (1).
6. Remove the lower steering shaft pinch bolt.
7. Remove the lower steering shaft off the column.
8. Loosen the brake pedal sled upper nuts
9. Remove the brake pedal assembly from the vehicle.
ADJUSTABLE PEDALS
NOTE: If possible put the pedals in the full forward position.
1. Disconnect the negative battery cable.
2. Remove the power brake booster (Refer to 5 - BRAKES/HYDRAULIC/MECHANICAL/POWER BRAKE BOOSTER - REMOVAL).
3. Remove the 2 intermediate shaft bearing nuts (1).
4. Remove the lower steering shaft pinch bolt.
5. Remove the lower steering shaft off the column.
6. Lock the steering wheel into place.
7. Disconnect the pedal motor electrical connector.
8. Disconnect the accelerator pedal cable.
9. Disconnect the 2 accelerator pedal mounting nuts (4).
10. Loosen the brake pedal sled (1) upper nuts
11. Remove the brake pedal/accelerator pedal assembly (2&3) from the vehicle.